Bash Tutorial
A brief overview of Bash, on your way to becoming a Linux expert. When a computer boots up, a kernel (MacOS, Windows, Linux) is started. This kernel provides a shell that allows user to interact with a most basic set of commands. Typically, the casual user will not interact with the shell as a Desktop User Interface is started by the computer boot up process. To activate a shell directly, users will run a “terminal” through the Desktop. VS Code provides ability to activate “terminal” while in the IDE.
Prerequisites
Setup bash shell dependency variables for this page.
- Hack: Change variables to match your project.
%%script bash
# Dependency Variables, set to match your project directories
cat <<EOF > /tmp/variables.sh
export project_dir=$HOME/vscode # change vscode to different name to test git clone
export project=\$project_dir/ankit2 # change teacher to name of project from git clone
export project_repo="https://github.com/Ankit-177/ankit2.git" # change to project of choice
EOF
%%script bash
# Extract saved variables
source /tmp/variables.sh
# Access the variables
echo "Project dir: $project_dir"
echo "Project: $project"
echo "Repo: $project_repo"
Project dir: /home/ankitp/vscode
Project: /home/ankitp/vscode/ankit2
Repo: https://github.com/Ankit-177/ankit2.git
Setup Project
Pull code from GitHub to your machine. This script will create a project directory and add “project” from GitHub to the vscode directory. There is conditional logic to make sure that clone only happen if it does not (!) exist.
%%script bash
# Extract saved variables
source /tmp/variables.sh
echo "Using conditional statement to create a project directory and project"
cd ~ # start in home directory
# Conditional block to make a project directory
if [ ! -d $project_dir ]
then
echo "Directory $project_dir does not exists... makinng directory $project_dir"
mkdir -p $project_dir
fi
echo "Directory $project_dir exists."
# Conditional block to git clone a project from project_repo
if [ ! -d $project ]
then
echo "Directory $project does not exists... cloning $project_repo"
cd $project_dir
git clone $project_repo
cd ~
fi
echo "Directory $project exists."
Using conditional statement to create a project directory and project
Directory /home/ankitp/vscode exists.
Directory /home/ankitp/vscode/ankit2 exists.
Look at files Github project
All computers contain files and directories. The clone brought more files from cloud to your machine. Review the bash shell script observe the commands that show and interact with files and directories.
- “ls” lists computer files in Unix and Unix-like operating systems
- “cd” offers way to navigate and change working directory
- “pwd” print working directory
- “echo” used to display line of text/string that are passed as an argument
%%script bash
# Extract saved variables
source /tmp/variables.sh
echo "Navigate to project, then navigate to area wwhere files were cloned"
cd $project
pwd
echo ""
echo "list top level or root of files with project pulled from github"
ls
Navigate to project, then navigate to area wwhere files were cloned
/home/ankitp/vscode/ankit2
list top level or root of files with project pulled from github
Gemfile
Gemfile.lock
LICENSE
Makefile
README.md
_config.yml
_data
_includes
_layouts
_notebooks
_posts
_site
compsci.md
images
index.md
indexBlogs.md
indexHelp.md
scripts
Look at file list with hidden and long attributes
Most linux commands have options to enhance behavior
%%script bash
# Extract saved variables
source /tmp/variables.sh
echo "Navigate to project, then navigate to area wwhere files were cloned"
cd $project
pwd
echo ""
echo "list all files in long format"
ls -al # all files -a (hidden) in -l long listing
Navigate to project, then navigate to area wwhere files were cloned
/home/ankitp/vscode/ankit2
list all files in long format
total 100
drwxr-xr-x 12 ankitp ankitp 4096 Aug 28 01:53 .
drwxr-xr-x 4 ankitp ankitp 4096 Aug 28 01:36 ..
drwxr-xr-x 8 ankitp ankitp 4096 Aug 28 01:57 .git
drwxr-xr-x 3 ankitp ankitp 4096 Aug 28 01:36 .github
-rw-r--r-- 1 ankitp ankitp 104 Aug 28 01:36 .gitignore
-rw-r--r-- 1 ankitp ankitp 122 Aug 28 01:36 Gemfile
-rw-r--r-- 1 ankitp ankitp 7293 Aug 28 01:53 Gemfile.lock
-rw-r--r-- 1 ankitp ankitp 1081 Aug 28 01:36 LICENSE
-rw-r--r-- 1 ankitp ankitp 3120 Aug 28 01:36 Makefile
-rw-r--r-- 1 ankitp ankitp 5798 Aug 28 01:36 README.md
-rw-r--r-- 1 ankitp ankitp 451 Aug 28 01:36 _config.yml
drwxr-xr-x 2 ankitp ankitp 4096 Aug 28 01:36 _data
drwxr-xr-x 2 ankitp ankitp 4096 Aug 28 01:36 _includes
drwxr-xr-x 2 ankitp ankitp 4096 Aug 28 01:36 _layouts
drwxr-xr-x 2 ankitp ankitp 4096 Aug 28 01:44 _notebooks
drwxr-xr-x 2 ankitp ankitp 4096 Aug 28 01:53 _posts
drwxr-xr-x 8 ankitp ankitp 4096 Aug 28 01:53 _site
-rw-r--r-- 1 ankitp ankitp 91 Aug 28 01:36 compsci.md
drwxr-xr-x 2 ankitp ankitp 4096 Aug 28 01:36 images
-rwxrwxrwx 1 ankitp ankitp 2838 Aug 28 01:43 index.md
-rw-r--r-- 1 ankitp ankitp 53 Aug 28 01:36 indexBlogs.md
-rw-r--r-- 1 ankitp ankitp 50 Aug 28 01:36 indexHelp.md
drwxr-xr-x 3 ankitp ankitp 4096 Aug 28 01:36 scripts
%%script bash
# Extract saved variables
source /tmp/variables.sh
echo "Look for posts"
export posts=$project/_posts # _posts inside project
cd $posts # this should exist per fastpages
pwd # present working directory
ls -l # list posts
Look for posts
/home/ankitp/vscode/ankit2/_posts
total 68
-rw-r--r-- 1 ankitp ankitp 704 Aug 28 01:36 2023-08-15-Tools_Plans_Sample.md
-rw-r--r-- 1 ankitp ankitp 4447 Aug 28 01:36 2023-08-16-Tools_Hacks_Sample.md
-rw-r--r-- 1 ankitp ankitp 549 Aug 28 01:36 2023-08-16-Tools_Help.md
-rw-r--r-- 1 ankitp ankitp 25923 Aug 28 01:53 2023-08-16-linux_shell_IPYNB_2_.md
-rw-r--r-- 1 ankitp ankitp 3751 Aug 28 01:53 2023-08-17-Markdown_Table_Code_Hack_IPYNB_2_.md
-rw-r--r-- 1 ankitp ankitp 2052 Aug 28 01:36 2023-08-21-GitHub_Pages_Plans.md
-rw-r--r-- 1 ankitp ankitp 1003 Aug 28 01:36 2023-08-21-GitHub_Pages_Tangibles.md
-rw-r--r-- 1 ankitp ankitp 6356 Aug 28 01:53 2023-08-21-HTML_Image_Hack_IPYNB_2_.md
-rw-r--r-- 1 ankitp ankitp 2448 Aug 28 01:36 2023-08-26-GitHub_Sync.md
%%script bash
# Extract saved variables
source /tmp/variables.sh
echo "Look for notebooks"
export notebooks=$project/_notebooks # _notebooks is inside project
cd $notebooks # this should exist per fastpages
pwd # present working directory
ls -l # list notebooks
Look for notebooks
/home/ankitp/vscode/ankit2/_notebooks
total 60
-rwxrwxrwx 1 ankitp ankitp 35278 Aug 28 01:45 2023-08-16-linux_shell.ipynb
-rw-r--r-- 1 ankitp ankitp 5506 Aug 28 01:36 2023-08-17-Markdown_Table_Code_Hack.ipynb
-rw-r--r-- 1 ankitp ankitp 8948 Aug 28 01:36 2023-08-21-HTML_Image_Hack.ipynb
-rwxrwxrwx 1 ankitp ankitp 2240 Aug 28 01:44 quiz.py
%%script bash
# Extract saved variables
source /tmp/variables.sh
echo "Look for images in notebooks, print working directory, list files"
cd $notebooks/images # this should exist per fastpages
pwd
ls -l
Look for images in notebooks, print working directory, list files
/home/ankitp/vscode/ankit2/_notebooks
total 60
-rwxrwxrwx 1 ankitp ankitp 35278 Aug 28 01:45 2023-08-16-linux_shell.ipynb
-rw-r--r-- 1 ankitp ankitp 5506 Aug 28 01:36 2023-08-17-Markdown_Table_Code_Hack.ipynb
-rw-r--r-- 1 ankitp ankitp 8948 Aug 28 01:36 2023-08-21-HTML_Image_Hack.ipynb
-rwxrwxrwx 1 ankitp ankitp 2240 Aug 28 01:44 quiz.py
bash: line 6: cd: /images: No such file or directory
Look inside a Markdown File
“cat” reads data from the file and gives its content as output
%%script bash
# Extract saved variables
source /tmp/variables.sh
echo "Navigate to project, then navigate to area wwhere files were cloned"
cd $project
echo "show the contents of README.md"
echo ""
cat README.md # show contents of file, in this case markdown
echo ""
echo "end of README.md"
Navigate to project, then navigate to area wwhere files were cloned
show the contents of README.md
## Blog site using GitHub Pages and Jekyll
> This site is intended for Students. This is to record plans, complete hacks, and do work for your learnings.
- This can be customized to support computer science as you work through pathway (JavaScript, Python/Flask, Java/Spring)
- All tangible artifact work is in a _posts or in a _notebooks.
- Front matter (aka meta data) in ipynb and md files is used to organize information according to week and column in running web site.
## GitHub Pages
All `GitHub Pages` websites are managed on GitHub infrastructure. GitHub uses `Jekyll` to tranform your content into static websites and blogs. Each time we change files in GitHub it initiates a GitHub Action that rebuilds and publishes the site with Jekyll.
- GitHub Pages is powered by: [Jekyll](https://jekyllrb.com/).
- Publised teacher website: [nighthawkcoders.github.io/teacher](https://nighthawkcoders.github.io/teacher/)
## Preparing a Preview Site
In all development, it is recommended to test your code before deployment. The GitHub Pages development process is optimized by testing your development on your local machine, prior to files on GitHub
Development Cycle. For GitHub pages, the tooling described below will create a development cycle `make-code-save-preview`. In the development cycle, it is a requirement to preview work locally, prior to doing a VSCode `commit` to git.
Deployment Cycle. In the deplopyment cycle, `sync-github-action-review`, it is a requirement to complete the development cycle prior to doing a VSCode `sync`. The sync triggers github repository update. The action starts the jekyll build to publish the website. Any step can have errors and will require you to do a review.
### WSL and/or Ubuntu installation requirements
- The result of these step is Ubuntu tools to run preview server. These procedures were created using [jekyllrb.com](https://jekyllrb.com/docs/installation/ubuntu/)
- Run scripts in scripts directory of teacher repo: setup_ubuntu.sh and activate.sh. Or, follow commands below.
```bash
## WSL/Ubuntu commands
# sudo apt install, installs packages for Ubuntu
echo "=== Ugrade Packages ==="
sudo apt update
sudo apt upgrade -y
#
echo "=== Install Ruby ==="
sudo apt install -y ruby-full build-essential zlib1g-dev
#
echo "=== Install Python ==="
sudo apt-get install -y python3 python3-pip python-is-python3
#
echo "=== Install Jupyter Notebook ==="
sudo apt-get install -y jupyter-notebook
# bash commands, install user requirements.
echo "=== GitHub pages build tools ==="
export GEM_HOME="$HOME/gems"
export PATH="$HOME/gems/bin:$PATH"
echo '# Install Ruby Gems to ~/gems' >> ~/.bashrc
echo 'export GEM_HOME="$HOME/gems"' >> ~/.bashrc
echo 'export PATH="$HOME/gems/bin:$PATH"' >> ~/.bashrc
echo "=== Gem install starting, thinking... ==="
gem install jekyll bundler
head -30 ./teacher/scripts/activate.sh
echo "=== !!!Start a new Terminal!!! ==="
```
### MacOs installation requirements
- Ihe result of these step are MacOS tools to run preview server. These procedures were created using [jekyllrb.com](https://jekyllrb.com/docs/installation/macos/). Run scripts in scripts directory of teacher repo: setup_macos.sh and activate_macos.sh. Or, follow commands below.
```bash
# MacOS commands
# brew install, installs packages for MacOS
echo "=== Ugrade Packages ==="
brew update
brew upgrade
#
echo "=== Install Ruby ==="
brew install chruby ruby-install xz
ruby-install ruby 3.1.3
#
echo "=== Install Python ==="
brew install python
#
echo "=== Install Jupyter Notebook ==="
brew install jupyter
# bash commands, install user requirements.
export GEM_HOME="$HOME/gems"
export PATH="$HOME/gems/bin:$PATH"
echo '# Install Ruby Gems to ~/gems' >> ~/.zshrc
echo 'export GEM_HOME="$HOME/gems"' >> ~/.zshrc
echo 'export PATH="$HOME/gems/bin:$PATH"' >> ~/.zshrc
echo "=== Gem install starting, thinking... ==="
gem install jekyll bundler
head -30 ./teacher/scripts/activate.sh
echo "=== !!!Start a new Terminal!!! ==="
```
### Preview
- The result of these step is server running on: http://0.0.0.0:4100/teacher/. Regeneration messages will run in terminal on any save. Press the Enter or Return key in the terminal at any time to enter commands.
- Complete installation
```bash
bundle install
```
- Run Server. This requires running terminal commands `make`, `make stop`, `make clean`, or `make convert` to manage the running server. Logging of details will appear in terminal. A `Makefile` has been created in project to support commands and start processes.
- Start preview server in terminal
```bash
cd ~/vscode/teacher # my project location, adapt as necessary
make
```
- Terminal output of shows server address. Cmd or Ctl click http location to open preview server in browser. Example Server address message...
```
Server address: http://0.0.0.0:4100/teacher/
```
- Save on ipynb or md activiates "regeneration". Refresh browser to see updates. Example terminal message...
```
Regenerating: 1 file(s) changed at 2023-07-31 06:54:32
_notebooks/2024-01-04-cockpit-setup.ipynb
```
- Terminal message are generated from background processes. Click return or enter to obtain prompt and use terminal as needed for other tasks. Alway return to root of project `cd ~/vscode/teacher` for all "make" actions.
- Stop preview server, but leave constructed files in project for your review.
```bash
make stop
```
- Stop server and "clean" constructed files, best choice when renaming files to eliminate potential duplicates in constructed files.
```bash
make clean
```
- Test notebook conversions, best choice to see if IPYNB conversion is acting up.
```bash
make convert
```
end of README.md
Env, Git and GitHub
Env(ironment) is used to capture things like path to Code or Home directory. Git and GitHub is NOT Only used to exchange code between individuals, it is often used to exchange code through servers, in our case deployment for Website. All tools we use have a behind the scenes hav relationship with the system they run on (MacOS, Windows, Linus) or a relationship with servers which they are connected to (ie GitHub). There is an “env” command in bash. There are environment files and setting files (.git/config) for Git. They both use a key/value concept.
- “env” show setting for your shell
- “git clone” sets up a director of files
- “cd $project” allows user to move inside that directory of files
- “.git” is a hidden directory that is used by git to establish relationship between machine and the git server on GitHub.
%%script bash
# This command has no dependencies
echo "Show the shell environment variables, key on left of equal value on right"
echo ""
env
Show the shell environment variables, key on left of equal value on right
SHELL=/bin/bash
PYTHONUNBUFFERED=1
WSL2_GUI_APPS_ENABLED=1
APPLICATION_INSIGHTS_NO_DIAGNOSTIC_CHANNEL=1
WSL_DISTRO_NAME=Ubuntu
ELECTRON_RUN_AS_NODE=1
VSCODE_AMD_ENTRYPOINT=vs/workbench/api/node/extensionHostProcess
NAME=Code
PWD=/home/ankitp/vscode/ankit2/_notebooks
LOGNAME=ankitp
PYDEVD_IPYTHON_COMPATIBLE_DEBUGGING=1
HOME=/home/ankitp
LANG=C.UTF-8
WSL_INTEROP=/run/WSL/311968_interop
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=00:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.zst=01;31:*.tzst=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.wim=01;31:*.swm=01;31:*.dwm=01;31:*.esd=01;31:*.jpg=01;35:*.jpeg=01;35:*.mjpg=01;35:*.mjpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.webp=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:
WAYLAND_DISPLAY=wayland-0
CLICOLOR=1
VSCODE_L10N_BUNDLE_LOCATION=
LESSCLOSE=/usr/bin/lesspipe %s %s
VSCODE_HANDLES_SIGPIPE=true
TERM=xterm-color
LESSOPEN=| /usr/bin/lesspipe %s
USER=ankitp
GIT_PAGER=cat
PYTHONIOENCODING=utf-8
DISPLAY=:0
SHLVL=2
PAGER=cat
VSCODE_CWD=/mnt/c/Users/ankit/AppData/Local/Programs/Microsoft VS Code
MPLBACKEND=module://matplotlib_inline.backend_inline
XDG_RUNTIME_DIR=/run/user/1000/
WSLENV=ELECTRON_RUN_AS_NODE/w:
VSCODE_WSL_EXT_LOCATION=/mnt/c/Users/ankit/.vscode/extensions/ms-vscode-remote.remote-wsl-0.81.0
XDG_DATA_DIRS=/usr/local/share:/usr/share:/var/lib/snapd/desktop
PATH=/bin:/home/ankitp/.local/bin:/home/ankitp/.vscode-server/bin/6c3e3dba23e8fadc360aed75ce363ba185c49794/bin/remote-cli:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/usr/lib/wsl/lib:/mnt/c/Windows/system32:/mnt/c/Windows:/mnt/c/Windows/System32/Wbem:/mnt/c/Windows/System32/WindowsPowerShell/v1.0/:/mnt/c/Windows/System32/OpenSSH/:/mnt/c/Program Files/dotnet/:/mnt/c/Program Files (x86)/NVIDIA Corporation/PhysX/Common:/mnt/c/Program Files/Git/cmd:/mnt/c/Users/ankit/AppData/Local/Microsoft/WindowsApps:/mnt/c/Users/ankit/AppData/Local/Programs/Microsoft VS Code/bin:/snap/bin:/home/ankitp/.vscode-server/bin/6c3e3dba23e8fadc360aed75ce363ba185c49794/bin/remote-cli:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/usr/lib/wsl/lib:/mnt/c/Windows/system32:/mnt/c/Windows:/mnt/c/Windows/System32/Wbem:/mnt/c/Windows/System32/WindowsPowerShell/v1.0/:/mnt/c/Windows/System32/OpenSSH/:/mnt/c/Program Files/dotnet/:/mnt/c/Program Files (x86)/NVIDIA Corporation/PhysX/Common:/mnt/c/Program Files/Git/cmd:/mnt/c/Users/ankit/AppData/Local/Microsoft/WindowsApps:/mnt/c/Users/ankit/AppData/Local/Programs/Microsoft VS Code/bin:/snap/bin
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
VSCODE_NLS_CONFIG={"locale":"en","osLocale":"en","availableLanguages":{}}
HOSTTYPE=x86_64
PULSE_SERVER=unix:/mnt/wslg/PulseServer
VSCODE_HANDLES_UNCAUGHT_ERRORS=true
VSCODE_IPC_HOOK_CLI=/run/user/1000/vscode-ipc-47c8a699-049a-4bbd-90ac-a52f25e66c32.sock
_=/bin/env
%%script bash
# Extract saved variables
source /tmp/variables.sh
cd $project
echo ""
echo "show the secrets of .git"
cd .git
ls -l
echo ""
echo "look at config file"
cat config
show the secrets of .git
total 60
-rw-r--r-- 1 ankitp ankitp 13 Aug 28 01:57 COMMIT_EDITMSG
-rw-r--r-- 1 ankitp ankitp 95 Aug 28 01:57 FETCH_HEAD
-rw-r--r-- 1 ankitp ankitp 21 Aug 28 01:36 HEAD
-rw-r--r-- 1 ankitp ankitp 41 Aug 28 01:57 ORIG_HEAD
drwxr-xr-x 2 ankitp ankitp 4096 Aug 28 01:36 branches
-rw-r--r-- 1 ankitp ankitp 260 Aug 28 01:36 config
-rw-r--r-- 1 ankitp ankitp 73 Aug 28 01:36 description
drwxr-xr-x 2 ankitp ankitp 4096 Aug 28 01:36 hooks
-rw-r--r-- 1 ankitp ankitp 4450 Aug 28 01:57 index
drwxr-xr-x 2 ankitp ankitp 4096 Aug 28 01:36 info
drwxr-xr-x 3 ankitp ankitp 4096 Aug 28 01:36 logs
drwxr-xr-x 13 ankitp ankitp 4096 Aug 28 01:57 objects
-rw-r--r-- 1 ankitp ankitp 112 Aug 28 01:36 packed-refs
drwxr-xr-x 5 ankitp ankitp 4096 Aug 28 01:36 refs
look at config file
[core]
repositoryformatversion = 0
filemode = true
bare = false
logallrefupdates = true
[remote "origin"]
url = https://github.com/Ankit-177/ankit2.git
fetch = +refs/heads/*:refs/remotes/origin/*
[branch "main"]
remote = origin
merge = refs/heads/main
Student Request - Make a file in Bash
This example was requested by a student (Jun Lim, CSA). The request was to make jupyer file using bash, I adapted the request to markdown. This type of thought will have great extrapolation to coding and possibilities of using List, Arrays, or APIs to build user interfaces. JavaScript is a language where building HTML is very common.
To get more interesting output from terminal, this will require using something like mdless (https://github.com/ttscoff/mdless). This enables see markdown in rendered format.
- On Desktop Install PKG from MacPorts
- In Terminal on MacOS
- Install ncurses
gem install mdless
Output of the example is much nicer in “jupyter”
%%script bash
# This example has error in VSCode, it run best on Jupyter
cd /tmp
file="sample.md"
if [ -f "$file" ]; then
rm $file
fi
tee -a $file >/dev/null <<EOF
# Show Generated Markdown
This introductory paragraph and this line and the title above are generated using tee with the standard input (<<) redirection operator.
- This bulleted element is still part of the tee body.
EOF
echo "- This bulleted element and lines below are generated using echo with standard output (>>) redirection operator." >> $file
echo "- The list definition, as is, is using space to seperate lines. Thus the use of commas and hyphens in output." >> $file
actions=("ls,list-directory" "cd,change-directory" "pwd,present-working-directory" "if-then-fi,test-condition" "env,bash-environment-variables" "cat,view-file-contents" "tee,write-to-output" "echo,display-content-of-string" "echo_text_>\$file,write-content-to-file" "echo_text_>>\$file,append-content-to-file")
for action in ${actions[@]}; do # for loop is very similar to other language, though [@], semi-colon, do are new
action=${action//-/ } # convert dash to space
action=${action//,/: } # convert comma to colon
action=${action//_text_/ \"sample text\" } # convert _text_ to sample text, note escape character \ to avoid "" having meaning
echo " - ${action//-/ }" >> $file # echo is redirected to file with >>
done
echo ""
echo "File listing and status"
ls -l $file # list file
wc $file # show words
mdless $file # this requires installation, but renders markown from terminal
rm $file # clean up termporary file
File listing and status
-rw-r--r-- 1 ankitp ankitp 809 Aug 28 01:59 sample.md
15 132 809 sample.md
[0m[0;1;47;90mShow Generated Markdown [0;2;30;47m========================================================[0m
This introductory paragraph and this line and the title above are generated
using tee with the standard input (<<) redirection operator.
[0;1;91m- [0;1;91m[0;97mThis [0;97mbulleted [0;97melement [0;97mis [0;97mstill [0;97mpart [0;97mof [0;97mthe [0;97mtee [0;97mbody.
[0;1;91m- [0;1;91m[0;97mThis [0;97mbulleted [0;97melement [0;97mand [0;97mlines [0;97mbelow [0;97mare [0;97mgenerated [0;97musing [0;97mecho [0;97mwith [0;97mstandard
[0;97moutput [0;97m(>>) [0;97mredirection [0;97moperator.
[0;1;91m- [0;1;91m[0;97mThe [0;97mlist [0;97mdefinition, [0;97mas [0;97mis, [0;97mis [0;97musing [0;97mspace [0;97mto [0;97mseperate [0;97mlines. [0;97mThus [0;97mthe [0;97muse [0;97mof
[0;97mcommas [0;97mand [0;97mhyphens [0;97min [0;97moutput.
[0;1;91m- [0;1;91m[0;97mls: [0;97mlist [0;97mdirectory
[0;1;91m- [0;1;91m[0;97mcd: [0;97mchange [0;97mdirectory
[0;1;91m- [0;1;91m[0;97mpwd: [0;97mpresent [0;97mworking [0;97mdirectory
[0;1;91m- [0;1;91m[0;97mif [0;97mthen [0;97mfi: [0;97mtest [0;97mcondition
[0;1;91m- [0;1;91m[0;97menv: [0;97mbash [0;97menvironment [0;97mvariables
[0;1;91m- [0;1;91m[0;97mcat: [0;97mview [0;97mfile [0;97mcontents
[0;1;91m- [0;1;91m[0;97mtee: [0;97mwrite [0;97mto [0;97moutput
[0;1;91m- [0;1;91m[0;97mecho: [0;97mdisplay [0;97mcontent [0;97mof [0;97mstring
[0;1;91m- [0;1;91m[0;97mecho [0;97m"sample [0;97mtext" [0;97m>$file: [0;97mwrite [0;97mcontent [0;97mto [0;97mfile
[0;1;91m- [0;1;91m[0;97mecho [0;97m"sample [0;97mtext" [0;97m>>$file: [0;97mappend [0;97mcontent [0;97mto [0;97mfile
[0m
Hack Preparation.
Review Tool Setup Procedures and think about some thing you could verify through a Shell notebook.
- Come up with your own student view of this procedure to show your tools are installed.
- Name and create notes on some Linux commands you will use frequently.
- Is there anything we use to verify tools we install? Review versions checks.
- Is there anything we could verify with Anaconda? or WSL?
- How would you update a repository? Could you do that in script above?